Atlona VGA Box Transmitter Extender (330 ft) | AT-VGA100-S
Atlona Passive VGA Transmitter Extender | MODEL: AT-VGA100-S
This plug and play VGA transmitter unit requires no drivers, software, or external power. Not only that, you will not notice any difference when you use this extender versus a direct connection. With this Atlona Passive VGA transmitter unit, you are able to send a perfect video signal over a CAT 5,6, or 7 cable a distance of up to 330 feet with resolutions up to 1280 x 1024!
This Atlona passive VGA box extender will of course work with a box receiver, but can also be matched with a wall-plate receiver as well.
Note: This is only a transmitter unit, the receiver is also required.
Applications:
Features:
- Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
- No power supplies are needed
- Perfect for extending VGA signal further away than standard cables may allows.
- Wall plate transmitter is compatible with “box” receiver and other way around.
- Resolution support up to 1280x1024
- Plug and Play, no drivers or software needed
- Any computer is compatible, no limitations
Max. Distance via CAT5 Cable:
- 640x480 pixels (15MHz) – 430ft
- 800x600 pixels (30MHz) – 320ft
- 1024x768 pixels (60MHz) – 250ft
- 1280x1024 pixels (100MHz) – 200ft
Model Number: | AT-VGA100-S |
---|---|
Manufacturer | Atlona |
Bandwidth Frequency: | 300 kHz max. |
Input Ports: | 1 x VGA |
Output Ports: | 1 x RJ45 |
Dimensions: | 4.3" x 3.03" x 1.02" |
Power Supply: | N/A |
Weight (lbs.): | 0.1500 |
Output / Connector | VGA |