Atlona VGA Wall Plate Transmitter Extender | AT-WPVGA-S
Atlona VGA Wall Plate Transmitter Extender | MODEL: AT-WPVGA-S
This plug and play VGA extender requires no drivers, software, or external power. You also will not notice any difference when you use this extender versus a direct contention. With this Atlona Passive VGA wall plate transmitter unit, you are able to send a perfect video signal over a CAT 5,6, or 7 cable, a distance of up to 330 feet with resolutions up to 1280 x 1024!
The wall plate transmitter will of course work with a wall plate receiver, but can also be matched with a box receiver as well.
Applications:
The VGA Extenders are a great solution for many different applications. Some examples would be a classroom, office environment, data-center, training room and any other areas where the computer must be placed further away from the users display.
Features:
- Extend signals up to 330ft away from the computer on a single low-cost Cat5, 6 or 7 cables.
- No power supplies are needed
- Perfect for extending VGA signal further away than standard cables may allows.
- Wall plate transmitter is compatible with “box” receiver and other way around.
- Resolution support up to 1280x1024
- Plug and Play, no drivers or software needed
- Any computer is compatible, no limitations
Technical Specifications:
- Input: HD15 female
- Output: RJ45 female
- Supported Resolutions: 800x600, 1024x768, 1280x768 and 1280x1024
- Transmission Distance: up to 330ft
- Dimensions: Single Gang
Max. Distance via CAT5 Cable:
- 640x480 pixels (15MHz) – 430ft
- 800x600 pixels (30MHz) – 320ft
- 1024x768 pixels (60MHz) – 250ft
- 1280x1024 pixels (100MHz) – 200ft
Warranty - 3 Years
Model Number: | AT-WPVGA-S |
---|---|
Manufacturer | Atlona |
Bandwidth Frequency: | 300 kHz max |
Input Ports: | 1 x VGA |
Output Ports: | 1 x RJ45 |
Dimensions: | 2.75 x 2.40 x 4.52 inches - Single Gang |
Power Supply: | None |
Weight (lbs.): | 0.1500 |
Output / Connector | VGA |